What is the camshaft, what does it do and how can it be modified

What is the camshaft, what does it do and how can it be modified. The camshaft is located at the top of an engine. Is is a long shaft with a series of lobes along it and it rotates relative to engine speed. The lobes push close the valves in the head and allow the engines cylinders to suck in air/fuel and expel exhaust gases.

Ultimately you want the intake valve opened as long as possible and want to delay the exhaust valve opening until the piston has started to enter the blow phase. Timing is critical. If the intake is not open for sufficiently long a time or the exhaust valves open early much of the power from the engine will be gone.

We describe the cam as a duration. A 360 degree duration would not close the valves and a 1 degree duration would keep the valves pretty much open all of the time. Manufacturers optimise their cams for best fuel economy at around 3000 rpm and require a smooth tickover. This caution gives the tuner a good oportunity to improve things.

The 3 power bands of cam durations.

An average family car will typically have a cam duration of 250 degrees or lower. By grinding down each side of the lobe on the cam you can increase the duration. As a general rule of thumb upto 265 degrees gives a good balance of extra power and maintains smooth running and is most suited to a standard engine.

Moving up to 290 degrees we have what is called a fast road cam. This will give a noticable increase in top end power but you will start to experience a slightly lump idle. Economy will also be impaired but in most cases you will be within your cars emission standards. This is what most readers of cartuningtips.com will be aiming at.

For ultimate performance you can increase the duration to 320 degrees. Tickover will be very irratic, the car is unlikely to pass any kind of emission check and your fuel economy will not exist!

When cams are marked “for competition use only” it will indicate that the cam is prone to excessive wear. This wear effectively reduces the lift and sucks your power. A competition cam is replaced at frequent intervals and is not something the average car owner wants to be doing.

Honda have a dual cam lobe which allows a profile for high rpm use and another for low engine speeds giving a much wider power band and good fuel economy.

 

 





Tuning Car Engine







Domain Names for All, Invest today in your domain names and you will BIG$$$$$$$$$ profit tomorrow!!!

Discount Car Insurance Tips
Car Tuning Resource & Tips
Tuning Car Engine
Game Cheats & Game Servers Blog - Counter Strike Cheats - Servers and more, Post your comments and even post some new cheats. Thanks for visiting us!
HotSpot Locations, FREE and Commercial Wi-Fi hotspots, Wi-Fi access zones Wi-Fi
DC++ Hub Lists By Country
DC++ Hubs List, DC++ Download
X3M Hubs, DC++ free download, hub list

Hosted by uCoz